Skip to content

5 min read · Updated 30 September 2026

Garden and Outdoor Lighting: A Practical Guide

How to plan lighting that is useful as well as pretty, and the timing mistake that makes it expensive later.

The short answer

Good garden lighting does three jobs: it lights routes safely, it makes a patio usable after dark and it picks out a few features so the garden looks good from indoors. Plan it at the design stage, so cables and ducts go in before patios, walls and planting are finished.

Mains powered outdoor circuits should be installed by a qualified electrician. Low voltage systems are simpler but still need a sensible layout and good quality fittings.

The main types of light

Path and step lights set into walls, risers or the ground make routes safe. Uplighters at the base of trees, walls or sculptural plants add drama. Downlights fixed high in a tree or on a pergola create a soft moonlight effect over a seating area. Strip lighting under benches or step nosings gives a modern, hidden glow. Wall lights by doors cover security and bins.

Mains or low voltage

Mains lighting suits larger gardens and brighter fittings, but outdoor circuits must follow the wiring regulations and are notifiable work in many cases. Low voltage systems run through a transformer, are safer to adjust and are popular for accent lighting. Solar lights are cheap and easy but rarely bright or reliable enough for steps and paths.

Timing and ducting

The single most useful tip is to lay ducting while the ground is open. Running a spare duct under a new patio, along a wall or out to a garden room costs little on the day and saves lifting paving later. Our landscaping and garden design projects allow for lighting ducts whenever clients think they might want lights in the future.

Getting the look right

Less is usually more. A handful of well placed warm white lights looks better than many bright ones. Aim fittings away from windows and neighbours, use timers or smart controls, and think about how the garden looks from the kitchen as well as from the patio.

Dark skies matter for wildlife too, so shielded fittings and switching lights off late in the evening are good habits.

Common lighting mistakes to avoid

The most frequent mistake is lighting everything. A fully lit garden looks flat and uses more power than it needs. A second is glare: bright fittings pointing towards the house or across a neighbour's garden are uncomfortable and can cause disputes. Choosing cheap fittings that corrode after a couple of winters is a third, so look for good ingress protection ratings and stainless or brass bodies near the coast or under trees. Forgetting controls is another. Separate circuits or smart switching let you light the patio for dinner without lighting the whole garden, and timers mean lights go off automatically late at night. Finally, test positions at night before fixing anything permanently. A torch held where a fitting will go shows quickly whether the effect works. Remember to leave a little slack in cables near plants, so fittings can be moved as shrubs and trees grow over the years.

Frequently asked questions

Do I need an electrician for garden lighting?
Mains powered outdoor lighting should be installed by a qualified electrician. Low voltage kits are simpler, but the transformer still needs a safe supply.
When should garden lighting be installed?
Ideally during a landscaping project, before paving and planting are finished, so cables and ducts can be laid easily.
Are solar garden lights any good?
They are fine for decorative touches, but they are often too dim and unreliable for steps and paths in winter.
What colour light is best for gardens?
Warm white is generally the most flattering for plants, stone and timber, and feels more relaxing than cool white.

More guides

Ready to transform your outdoor space?

Free site visits and no-pressure quotes within a 30-mile radius of Ash Vale - covering Surrey, Hampshire and Berkshire.