5 min read · Updated 30 September 2026
Garden Retaining Walls: Options and When You Need One
How to tell whether your slope needs a proper retaining wall, the main types, and the detail that makes the difference between standing and leaning.
The short answer
You need a retaining wall when you want to hold back soil to create a level area on a slope, such as a terrace for a patio, lawn or garden room. Low walls can be built in sleepers, blockwork or brick; taller walls, or walls holding back a driveway or building, need proper engineering.
Whatever the material, the wall only lasts if water can drain from behind it. Pressure from wet soil is what makes retaining walls bulge and lean.
The main types
Timber sleepers are quick to install and suit informal gardens and raised beds. Softwood sleepers eventually rot where they touch the soil, so hardwood or concrete sleepers are better for anything structural.
Blockwork with a render or stone cladding gives a clean modern finish and is strong for its cost. Brick walls match the house and suit traditional gardens. Gabions, wire cages filled with stone, drain freely by design and suit contemporary or wildlife friendly schemes. Our fitted price ranges for sleeper and brick retaining walls are listed in the landscaping cost guide.
Drainage behind the wall
Behind any solid retaining wall there should be free draining backfill, a perforated land drain at the base leading somewhere sensible, and weep holes or outlets through the face. A membrane stops the soil washing into the gravel. Skip these and the ground behind becomes saturated every winter.
On the heavy clay found across parts of Surrey and Hampshire, drainage is doubly important because clay holds water and swells.
Height, neighbours and permissions
Most low garden walls do not need planning permission, but walls next to a highway or above a certain height can. Where a wall sits on or near a boundary, the Party Wall Act may apply. Walls that support a neighbour's land, a drive or a structure should be designed by a structural engineer.
Signs an existing wall is failing
Look for bulging, a lean away from the soil, cracks that widen, damp patches on the face or soil washing out at the base. Our retaining wall bulging page explains the repair options. Catching movement early is almost always cheaper than rebuilding after a collapse.
Planning a terraced garden
Splitting a steep garden into two or three terraces is often more useful than one tall wall. Each level becomes a room with a purpose: a patio by the house, a lawn in the middle and planting or a garden room at the top. Lower walls are also easier to build well, and steps between levels can be designed into the walls rather than added later. Think about how you will move between levels with a mower, wheelbarrow or buggy, where rainwater will go at each step down, and whether you want seating built into the wall top. Planting the top edge with trailing shrubs softens hard faces quickly. Sketching the levels on a simple plan before anyone digs saves costly changes once the walls start to rise. A designer or experienced landscaper can also calculate how much soil each terrace creates or removes, which has a real effect on skip and muck away costs.
Frequently asked questions
- How high can a garden retaining wall be without an engineer?
- Low decorative walls are often built without an engineer, but anything tall, near a structure, holding back a drive or supporting a neighbour's land should be designed by a structural engineer.
- Are sleeper retaining walls a good idea?
- They work well for low walls and raised beds. Hardwood or concrete sleepers last longer than softwood where they touch the soil.
- Why do retaining walls lean?
- Usually because water builds up behind them. Poor drainage and inadequate foundations are the common causes.
- Do I need planning permission for a retaining wall?
- Most small garden walls do not, but walls next to a road or above certain heights can. Check with your local council before building.