Skip to content

Bordon · Hampshire

Aluminium gate repairs in Bordon

If your aluminium driveway or side gate in Bordon has dropped, sticks on the latch or has stopped opening on its motor, it can usually be put right without buying a new set. We look at the hinges, the posts and any automation first, then tell you honestly whether a repair makes sense.

Aluminium Gate Repairs in Bordon

What we tend to find on Bordon gates

Much of Whitehill and Bordon has been rebuilt on former Ministry of Defence land, so a large share of homes are recent builds. Gates fitted by developers on these plots are often lighter aluminium leaves hung on posts that were set quickly during construction, and the first thing to move is usually the hinge post rather than the gate itself.

The town sits on the edge of Woolmer Forest, where the ground is largely sandy heathland. Sandy soil drains well but gives less grip around a shallow post footing, so a gate that swings heavily or catches the wind can slowly lean the post until the leaf drags on the drive.

Older properties towards Lindford and the original garrison streets tend to have bigger, heavier gate sets, sometimes converted from timber. Here worn pivot pins, tired hinge bushes and misaligned drop bolts are the common faults.

Practical points for a Bordon repair

Most repairs are done from the driveway side, so we just need the gate clear of parked cars on the day. On newer estates with shared private drives, it helps to let neighbours know a gate may be off its hinges for part of the visit.

If the gate is automated, tell us the make and model of the motor when you get in touch, along with what it is doing (humming, stopping halfway, reversing). That lets us say on the visit what can be fixed there and then.

Aluminium Gate Repairs in Bordon: your questions

Do you repair aluminium gates elsewhere in Hampshire, not just Bordon?
Yes. Bordon is one of many East Hampshire and north Hampshire towns we work in, and the same repair service covers aluminium gates across the county and into Surrey.
My aluminium gate has dropped and drags on the drive. Does it need replacing?
Rarely. A dropped aluminium leaf is usually caused by worn hinges or a hinge post that has moved in its footing. Resetting the post in fresh concrete and fitting new hinges normally brings the gate back level.
Can scuffed powder coating on an aluminium gate be touched up?
Light scuffs and small chips can be touched up so bare metal is not left exposed. Large areas of failed coating are a different job, and we will tell you on the visit if that is what you are looking at.
Can you look at a gate motor that has stopped working?
We handle motor, photocell and safety-edge faults as part of our gate repair work. Share the motor make with your enquiry so we can check what is likely to be involved before we arrive.