Do you cover Frensham?

Yes - Frensham is inside our 30-mile coverage zone from Ash Vale and we work in GU10 every week.

How quickly can you quote a weld mesh perimeter in Frensham?

Most Frensham enquiries get a free site visit within five working days and a written quote within a week of that visit.

How long does a weld mesh perimeter take?

Allow 3 working days to 3 weeks on a typical Frensham property. Sloping plots, restricted access or larger formats add to that and we'll flag it on the quote.

What does a weld mesh perimeter cost in Frensham?

Weld mesh fencing typically runs £95 to £165 per metre fitted depending on mesh profile, height and post fixing, with gates from £1,800.

Do I need permission from Waverley Borough Council?

For most weld mesh perimeter work, no - but anything affecting the public highway (dropped kerbs) or a conservation frontage goes through Waverley Borough Council. We'll tell you on the visit which forms apply.

Live site installation · Surrey

Weld Mesh Fencing for Frensham sites that have to stay open

Frensham sites that trade through an installation need the programme designed first and the fence second. We phase runs in sections, use temporary heras where a length is open, take evening and weekend slots where daytime work would stop your operation, and keep vehicle access working throughout. The technical variable here is usually car parks with a full concrete slab where bolt down bases avoid breaking out the surface.

Talk to us before the tender closes 07538 218723 WhatsApp

Fully insured · £5m PL
Written 10-yr guarantee
Local Ash Vale team · ★ 5.0 Google
Fixed written quote, no deposit

Weld Mesh Fencing installed on a commercial site near Frensham, GU10, showing the perimeter detail described on this page

Perimeter risks specific to this area

Frensham is inside our 30-mile core area, so site visits are arranged within a week and project supervision is daily, not weekly.
We've spent enough time on GU10 streets to know which ground conditions matter for a weld mesh perimeter - the substation and utility compounds where post holes are hand dug because cabling runs close to the boundary that gets missed when a national firm quotes from a desk.
Quotes are written, fixed and broken down by stage, with the same crew on site from day one through to clean-down.

Local quick facts

Council: Waverley Borough Council
Transport: A287, no station - Farnham within 4 miles.
Postcodes: GU10
Typical timeline: 3 working days to 3 weeks

Specification written before mobilisation

358 mesh with 76.2mm x 12.7mm apertures, the standard anti-climb specification
Twin wire 868 and 656 panels where budget matters more than tool resistance
Heights from 1.8m to 3.0m with mesh returns or rotating toppings
Post options: RHS bolt down for hardstanding, concrete set for soft ground
Powder coated RAL 6005 green or RAL 9005 black over hot dip galvanising
£5m public liability and £10m employers liability, RAMS issued before mobilisation

Three practical outcomes for this page

Selected from the service brief and local property context rather than a generic location list.

01
Putting a 2.4m mesh perimeter around a school field without losing camera sightlines
02
Bolting mesh panels onto an existing car park slab so the surface never gets broken out
03
Enclosing a substation compound with 2.9m mesh and a rotating topping while cabling stays live

Evidence before mobilisation

We're insured to £5m public liability, registered for waste carriage, and every Frensham job is signed off in person rather than from photos.

FAQs - Weld Mesh Fencing in Frensham

What local conditions change the specification around GU10?: Most often car parks with a full concrete slab where bolt down bases avoid breaking out the surface. We also record ground type, buried services, gate swept paths and whether the boundary is overlooked by existing camera coverage before fixing the specification.
Do you provide a written specification we can tender against?: Yes. The quote states profile or section, height, post centres, foundation detail, toppings, gate hardware and programme, so a procurement team can compare it against other tenders line by line rather than on a headline figure.
What is the cost of a weld mesh perimeter for a site near Tilford?: Weld mesh fencing typically runs £95 to £165 per metre fitted depending on mesh profile, height and post fixing, with gates from £1,800. Ground conditions and access on the individual site move that figure, which is why we survey before committing to a rate or a programme date.
What guarantee comes with a commercial install?: A written workmanship guarantee on every commercial installation, alongside the manufacturer cover on materials and any gate automation. It is issued at handover with the site walk round, not promised verbally.
What insurance do you carry for work in Frensham?: £5m public liability and £10m employers liability. Certificates go out with task specific RAMS and CSCS records before mobilisation, which is normally what a facilities manager or principal contractor asks for before booking an induction.
Can the weld mesh perimeter be installed while our Frensham site stays open?: Yes. We phase the run so no section is left open at the end of a day, keep vehicle and pedestrian routes working, and take out of hours slots where daytime work would interrupt trading. That approach is priced into the quote rather than added later.

Turning a risk into a specification

If the driver is an insurance requirement or a planning condition, send the wording. The specification is written against that document rather than against a standard product sheet. This applies to weld mesh fencing enquiries from Frensham and the surrounding GU10 commercial estates.

Talk to us before the tender closes

We can attend outside trading hours if a daytime visit is disruptive. Mention Frensham and weld mesh fencing so the enquiry reaches the commercial survey list.

Plan the Frensham visit 07538 218723

Where this commercial page reaches

Same service, other towns